Top Scoops

Book Reviews | Gordon Campbell | Scoop News | Wellington Scoop | Community Scoop | Search

 

Working from home: Networks for beginners

Working from home may mean you need a better domestic data networks. That way you can Zoom with colleague while others watch Netflix or give the Playstation a workout. Here’s what you need to know before you upgrade.

Basics


Before we get down to details, some basics. If you have a UFB fibre connection, this enters your house at something called the Optical Network Terminal. You may also hear people call it an ONT.

Most of the time, the ONT connects direct to your home Wi-fi router.

Chorus ONT A Chorus Optical Network Terminal

If you have copper broadband, then you need a modem and a Wi-fi router, although these days the two devices often sit in the same box.

Fixed wireless broadband users have a box which may be called a modem, router or something similar.

A router is a specialised computer that switches data to and from circuits. Some people call them switches. Typically there will be one incoming port and four outgoing ports.

They all use something called Ethernet, which is a 40-year-old wire network technology. Ethernet is reliable and can run at speeds from a few megabits per second up to 400 gigabits per second.

Today’s home routers also offer Wi-fi. This is a wireless networking technology. It’s what most people use most of the time.

Wi-fi can be fiddly to get going at first, but once working tends to be the easiest way to move data around the house. As we shall see, Wi-fi is great, but has limitations.

Wired is best


If you can use wired network connections at home, do so. At a minimum this means a direct cable from your home router to your TV. If you have shared data storage connect that to your router with a cable too.

Ideally you’d connect a shared printed direct to your router using an Ethernet cable. That tends to be awkward given that most people chose to have their Onts and routers next to the TV, which is often not the best place for a printer.

Wire is fast


Wires will always give you better speeds and more reliable connections.

Modern home routers often, but not always, offer gigabit Ethernet. Some might only have a single gigabit port with the rest running at 100Mbps. Either of these will be more than enough to get data from your fibre connection to your TV.

Using wire connections is even more important if you have a gigabit fibre internet connection: see below.

Wired networks may offer the best performance, but there’s more to networking than raw speed. Sometimes a slower connection is the better option.

Ethernet


Ethernet comes with a couple of catches. First, running Ethernet around the house isn’t easy or cheap.

Paying someone else to do the wiring job can be expensive, although it can be wiser in the long term if that’s what you really need. In truth, you can almost always get away without going that far.

The second catch is that Ethernet may often be less help than you’d think. That’s because a lot of modern devices don’t use it. Your tablet and phone certainly won’t come with an Ethernet port.

Many modern printers made for homes and home offices don’t have Ethernet. Which is handy as it means you can put them where they are less disruptive.

So, like it or not, Wi-fi will have to do a lot of your home network heavy lifting.

Gigabit broadband, slowcoach Wi-fi


The problem with Wi-fi at the moment is that most home wireless networks can’t run at speeds faster than about 500Mbps.

That is if you are lucky. Typically you’ll see slower speeds.

To make matters worse, everything connected to Wi-fi shares the same bandwidth. What’s more, Wi-fi doesn’t travel too well through solid objects.

Wi-fi signals can usually get through the plasterboard walls in New Zealand house. Yet performance can drop off dramatically the further you are from the router or the more solid material there is between you and the router.

It’s not unusual for home network speeds to drop below 100mbps. Which is disappointing if you have a gigabit broadband plan.

Given the number of phones, tablets, computers, games consoles and other kit in a modern house, your devices might only get tens of megabits per second each.

The good news is that not everything uses the bandwidth at the same time.

Which means if you connect to, say, Speedtest, from a home computer connected to gigabit fibre but linked to your broadband port via Wi-fi and nothing else is running you might see speeds of 300Mbps to 400Mbps on a good day. Some connections will be slower.

One way to reduce congestion is to use a mesh network. These spread the wireless signals around

Wi-fi 6 will fix some of this


There’s a new version of Wi-fi that promises to fix some of these problems. Wi-fi 6, or 802.11ax as it is sometimes known, promises faster speeds, less congestion and less pressure on device batteries.

You need to be careful reading specifications for Wi-fi router devices. Read the marketing material for a router using the older Wi-fi 5 standard and you might see a claim it runs at 3Gbps.

This will be a theoretical maximum speed. You will never see anything like that. In reality individual device speeds top out at around 500Mbps.

A Wi-fi 6 router might say 10Gbps on the box. In practice you may only see a small speed increase if you connect a Wi-fi 6 equipped laptop to a Wi-fi 6 router when compared to Wi-fi 5 speeds.

Although there may be a bigger speed jump.

If you think this language sounds like hedging, it is. Like anything to do with wireless communications, speed depends on a number of factors. You may not be able to control all of them.

Congestion


While you should see minor, yet noticeable speed improvements with Wi-fi 6 on individual devices, that isn’t the technology’s main goal.

Wi-fi 6 is more about improving network performance when there are lots of devices connected. It does a better job of managing congestion.

As more and more devices connect to the network, congestion gets worse leaving less headroom for each individual connection. Wi-fi 6 lets a router communicate with more devices at the same time.

Security is the other advantage Wi-fi 6 has over Wi-fi 5. It uses a security protocol called WPA3 that makes it even harder for hackers to guess passwords.

Getting to Wi-fi 6


This all sounds great, but there is one huge drawback to Wi-fi 6. It isn’t a simple software upgrade, it is all about hardware.

To get its benefits you will not only need a Wi-fi 6 router, but you will also need new Wi-fi 6 equipped devices.

A new Wi-fi modem might be a few hundred dollars. New everything else will run to thousands.

Wi-fi 6 equipped devices are only now coming on to the market. Apple’s latest iPad Pro models have Wi-fi 6. At the time of writing no Apple Mac models do.

In fact, you will struggle to find Wi-fi 6 devices in general. When I checked I managed to find one new Dell laptop and one HP laptop with Wi-fi 6 support. If there are Wi-Fi 6 TVs or smart home devices they have yet to be announced in New Zealand.

This means unless you have one or more Wi-Fi 6 devices, it is pointless upgrading your router.

One last point. Wi-fi 6 delivers screaming performance when you have a mesh router using the technology. They are expensive at the time of writing, New Zealand prices start at around $1000, but they can flood your home with fast wireless.

Working from home: Networks for beginners was first posted at billbennett.co.nz

© Scoop Media

 
 
 
Top Scoops Headlines

 

Gordon Campbell: On The Media Collusion With National’s Attack Lines

For most of the past week, any consumer of this country’s management of Covid-19 would think New Zealand was actually Brazil, or Texas. The media language has been full of claims of “botches” at the border, and laxness and inexcusable errors ... More>>

Gregor Thompson: Don’t Be Too Pessimistic About New Zealand’s Future.

With the first hurdle hopped our Government will be turning its attention to trying to soften the economic damage this pandemic has on our little archipelago. More>>

Eric Zuesse: U.S. Empire: Biden And Kerry Gave Orders To Ukraine’s President

Eric Zuesse, originally posted at Strategic Culture On May 19th, an implicit international political warning was issued, but it wasn’t issued between countries; it was issued between allied versus opposed factions within each of two countries: U.S. and Ukraine. ... More>>

Binoy Kampmark: Budget Cockups In The Time Of Coronavirus: Reporting Errors And Australia’s JobKeeper Scheme

Hell has, in its raging fires, ringside seats for those who like their spreadsheets. The seating, already peopled by those from human resources, white collar criminals and accountants, becomes toastier for those who make errors with those spreadsheets. ... More>>

Binoy Kampmark: Altars Of Hypocrisy: George Floyd, Protest And Black Face

Be wary what you protest about. The modern moral constabulary are out, and they are assisted by their Silicon Valley friends in the Social Media club. Should you dare take a stand on anything, especially in a dramatic way, you will be found out ... More>>

Binoy Kampmark: Welcome Deaths: Coronavirus And The Open Plan Office

For anybody familiar with that gruesome manifestation of the modern work place, namely the open plan office, the advent of coronavirus might be something of a relief. The prospects for infection in such spaces is simply too great. You are at risk from ... More>>


Binoy Kampmark: Why Thinking Makes It So: Donald Trump’s Obamagate Fixation

The “gate” suffix has been wearing thin since the break-in scandal that gave it its birth. Since Watergate, virtually anything dubious and suggestive, and much more besides, is suffixed. Which brings us to the issue of President Donald Trump’s ... More>>



Binoy Kampmark: Brutal Choices: Anders Tegnell And Sweden’s Herd Immunity Goal

If the title of epidemiological czar were to be created, its first occupant would have to be Sweden’s Anders Tegnell. He has held sway in the face of sceptics and concern that his “herd immunity” approach to COVID-19 is a dangerous, and breathtakingly ... More>>