Video | Agriculture | Confidence | Economy | Energy | Employment | Finance | Media | Property | RBNZ | Science | SOEs | Tax | Technology | Telecoms | Tourism | Transport | Search


Device to diagnose melanoma wins James Dyson Award

Press release
Thursday 9 November, 2017

Low cost, handheld device to diagnose melanoma wins international James Dyson Award
The sKan uses heat detection to help physicians quickly identify skin cancer

With 13 people diagnosed with melanoma every day[1] New Zealand has the highest incidence of melanoma in the world. When diagnosed and treated early, melanoma is usually curable, but the disease still claims tens of thousands of lives every year. In New Zealand alone, over 300 lives are lost to melanoma, annually[2].

Early diagnostic methods rely heavily on visual inspections, which are inaccurate. More advanced methods are time consuming and expensive, adding avoidable strain to already over-burdened health services. Those who do not go through biopsy procedures run the risk of missed detection.

Four engineering undergraduates at McMaster University, Canada, set out to tackle the problem of melanoma diagnosis. Their solution, the Skan, is a cheaper, easy to use diagnostic system that could save lives through early detection, while also saving health services valuable time and money.

As international winners of the James Dyson Award, the team will be given more than $55,000[3] to develop their idea.

How the sKan works
Cancerous cells have a higher metabolic rate than normal cells. As such, they release more heat. This means that after a thermal shock is applied (for example, via an ice pack), the cancerous tissue will regain heat more quickly than the non-concerous tissue, indicating a strong likelihood of melanoma.

The sKan incorporates an array of thermistors – highly accurate and inexpensive temperature sensors. This array is placed on the region of interest, and tracks its return to ambient termperature after being cooled. The thermistor readings are digitised, whereupon time synchronous averaging, temperature variation detection and spatial validation are conducted on the signal. The results are displayed as a heat map and temperature difference time plot, together with a statement of findings – showing the presence, or lack of presence, of melanoma.

While non-invasive, thermal imaging techniques for melanoma diagnosis exist, these are expensive as they use high resolution thermal imaging cameras, which cost upwards of $38,000. The anticipated cost of the sKan is approximately $1100.

Watch the the video to see how the sKan works.

James Dyson says: “By using widely available and inexpensive components, the sKan allows for melanoma skin cancer detection to be readily accessible to the many. It’s a very clever device with the potential to save lives around the world. This is why I have selected it at this years international winner”.

Dr. Raimond Wong, Chairman of the Gastrointestinal Oncology Site Group at the Juravinski Cancer Centre says: “Current methods of detecting wether a lesion is melanoma or not is through the trained eyes of physicians – resulting in patients undergoing unnecessary surgery or late detection of melanoma. The sKan has the potential to be a low cost, easy to use and effective device, that can be afforded and adopted across health services.

The sKan team: “Winning the James Dyson Award means the world to us. The prize money will help us to continue developing a medical device that can saves people’s lives. We are truly humbled and excited to be given this remarkable opportunity”.

The team have big ambitions for their device who plan to use the prize money to continue reiterating and refining the product to a level where it will receive FDA approval. From here, they hope to see the device being used across medical practices worldwide.


For more information, please get in touch with or call the Dyson Press Office on 0207 833 8244.


How the technology works:
· The design consists of a transducer, a conditioning circuit, an analog to digital converter and a software processor.The transducer is an array of thermistors placed on the region of interest as it returns to ambient temperature after being cooled. As the temperatures of each thermistor varies, the voltage through the circuit changes, sending a signal through a specific conditioning circuit to filter and amplify the signal before becoming digitized by a microcontroller. The signal is then sent to a computer through a serial connection to be formatted and fitted to thermistor parametric curves. The results are displayed through a heat map and a temperature time plot, paired with a statement of the findings. The analysis reports the location and range of temperature differences on a temporal metric.

Global melanoma statistics:
· 132,000 instances of melanoma cancers occur globally every year[4].
· 1 in every 3 cancers diagnosed each year is skin cancer[5].

NZ melanoma statistics:
· In New Zealand, 13 people are diagnosed with melanoma every day.
· In New Zealand alone, over 300 people
's lives are lost to melanoma skin cancer every year.

International runners-up:

Atropos, Gabriele Natale, Design & Engineering, Politecnico di Milano, Italy
Problem: Current high-performance 3D printing tools waste large amounts of material.
Solution: Atropos is a 6-axis robotic arm, able to print 3D objects, by starting from a CAD file. Atropos uses continuous fiber composites material, to produce high-performance objects. Fibers are saturated, while a numerically-controlled machine is able to deposit them in a precise and repeatable way.

Twistlight, Tina Zimmer, Product Design, Gestaltung Köln, Germany
Problem: Although vein-puncture is the most common medical procedure in the world, 33% of vein-puncture attempts fail at the first attempt. The risk of an infection and complication increases with every further attempt. Every abortive attempt prolongates the therapy and increases the cost, along with the pain and stress levels of both patient and medical staff.
Solution: Twistlight uses LED lights in a diagnostically relevant way to guide it clearly into the tissue. It makes veins appear highly contrasted within its surrounding dermal tissue. The device can be used single handed, therefore the other hand can be used to undo the vein strap, tension the skin and fix the catheter in place when pulling out the steel stylet. The device incorporates an integrated catheter feed and catheter guidance. The device is battery-powered and therefore can be used in hospitals, offices and out in the field, with the emergency services.

The James Dyson Award
The James Dyson Award runs in 23 countries. The contest is open to university level students (and recent graduates) studying product design, industrial design and engineering.
The award encourages ideas that challenge convention, lean engineering – less is more, and design with the environment in mind. The best inventions are simple and practical yet provide a solution to a real world problem. A national winner is selected for every country the award runs in, before going through to the final phase where the international winner is chosen by James Dyson.
The award is run by the James Dyson Foundation, a registered charity set up in 2002 which exists to inspire and support the next generation of engineers.
What is the prize?
International Winner:
· The international prize is over $55,000 (equiv. £30,000) for the student and over $9000 (equiv. £5,000) for the student’s university department.

Up to two International Runners-up:
· Over $9000 (Equiv. £5,000 each)

National Winners
· Over $3500 (Equiv. £2,000) each

What is the competition timeline?
· Opens: 30 March 2017
· Close: 20 July 2017
· National winners and finalists announced: 7 September 2017
· Dyson engineers’ shortlist: 28 September 2017
· International winner and finalists announced: 09 November 2017

Who can enter the James Dyson Award?
Any university level student of product design, industrial design or engineering, or graduate within four years of graduation, who is studying or studied in Australia, Austria, Belgium, Canada, China, France, Germany, Hong Kong, India, Italy, Ireland, Japan, Malaysia, the Netherlands, New Zealand, Russia, Singapore, Spain, South Korea, Switzerland, Taiwan, the UK and the USA.
For more information and regular updates on the progress of the James Dyson Award, follow the James Dyson Foundation on Facebook and Twitter. Entries can be made by visiting the James Dyson Award website here.
Dyson Institute of Engineering and Technology
· The first cohort of Dyson Undergraduate Engineers will arrive on the Dyson campus in September 2017 to begin four years of employment and study with the Dyson Institute. This is Dyson’s first step to attaining degree-awarding powers and university status.
· More than a degree, more than a university: undergraduate engineers will gain hands-on experience from day one as part of the Global Engineering team and academic rigour through their degree course.
· 33% of the offer holders are female compared to 16% of all UK engineering students and 9% of all UK engineers.
· James Dyson said, “The UK’s skills shortage is holding Dyson back as we look to increase the amount of technology we develop and export from the UK. We are taking matters into our own hands. The new degree course offers academic theory, a real-world job and salary, and access to experts in their field.”



[3] Equivalent of £30,000




© Scoop Media

Business Headlines | Sci-Tech Headlines


Science Media Centre: Understanding DDoS cyber attacks – Expert Reaction

Cyber attacks have hit several New Zealand organisations this month, disrupting their online services. The Distributed Denial of Service (DDoS) attacks were the same kind of cyber attack that affected the NZX around this time last year... More>>

Financial Markets Authority: Spike in investment scam complaints since COVID

The Financial Markets Authority (FMA) - Te Mana Tātai Hokohoko – is warning New Zealanders to be on the lookout for three unique types of scams that have been on the rise since the start of COVID-19. The warning comes as the FMA responds to a rise in complaints about investment scams and fraud lodged with the regulator in the first half of this year... More>>

Statistics: Strong export growth narrows current account deficit to $3B

The seasonally adjusted current account deficit narrowed to $3.0 billion in the June 2021 quarter, Stats NZ said today. The current account deficit was $2.2 billion narrower than the previous quarter due to an increase in value of goods exports (up $1.4 billion) and services exports (up $1.7 billion... More>>

Statistics: GDP rises in the June 2021 quarter

Gross domestic product (GDP) rose by 2.8 percent in the June 2021 quarter, following a 1.4 percent increase in the March 2021 quarter, Stats NZ said today. June 2021 quarter GDP was 4.3 percent higher when compared with the December 2019 quarter... More>>

Energy-from-waste: $350 Million Plant To Deliver Renewable Energy Considered

Investigations have begun into the viability of building an Energy-from-Waste plant that will safely convert 350,000 tonnes of waste, that would otherwise be dumped into South Island landfills annually, into renewable electricity... More>>

Olam: Confirms plans for commissioning of NZ dairy plant

OFI, a global leader in natural and sustainable food ingredient solutions, today confirmed plans to develop a new dairy processing facility at Tokoroa. It is now taking expressions of interest from potential farmer suppliers, employees, contractors, and general trade suppliers... More>>